Category Archives: VMAX Hump Day

VMAXHumpday, April 29th, 2015 – EMCWorld 2015 and other good stuff.

Posted on April 29, 2015 by sangeek

Hey readers! In my last VMAXHumpday, I talked about my presentation about VMAX3 with Sean Cummin’s at EMC.  It was a really awesome presentation, but unfortunately my recording was REALLY bad.  I hope to do another overview/demo now that I … Continue reading →

Posted in Conferences, EMC, EMC Elect, VMAX Hump Day | Leave a comment

VMAXHumpday, March 11, 2015 – Varrow Madness and VMAX3!

Posted on March 11, 2015 by sangeek

Hey readers!  Just wanted to release a quick note that next week March 19th, I will be doing a presentation on VMAX3 with Sean Cummins from EMC at the annual Varrow Madness being held this year in Greensboro, NC. Sean … Continue reading →

Posted in Conferences, EMC, EMC Elect, VMAX, VMAX Hump Day | Leave a comment

VMAXHumpday, 12/17/2014 – VMAX3 Unisphere Overview, a First Look

Posted on December 17, 2014 by sangeek

Hello!  Welcome to my semi-regular-weekly blog about VMAX.  Today I wanted to do a quick overview of my initial impressions of the new Unisphere and VMAX3.  I decided to create a video today.  I basically spent 10 minutes on the … Continue reading →

Posted in EMC, VMAX, VMAX Hump Day | 2 Comments

VMAXHumpday, 12/10/2014 – How to Expand a Striped Meta in Unisphere Online!

Posted on December 10, 2014 by sangeek

I originally took the summer off in what was my regular VMAX humpday posts…and then a little more time from blogging due to general life getting in the way…well no excuses, I should probably remedy that right now. Recently I … Continue reading →

Posted in EMC, varrow, VMAX, VMAX Hump Day | 2 Comments

VMAXHumpday, 5/21/2014 – TDATs, TDEVs, Thin pools, oh my!

Posted on May 21, 2014 by sangeek

Welcome to this week’s VMAXHumpday!  Hope you are having an awesome week!  Today I would like to talk about TDATs, TDEVs and Thin Pools!  Or as some people call them, the Lions, Tigers and Bears of VMAX!  OK…I Just made … Continue reading →

Posted in EMC, VMAX, VMAX Hump Day | Leave a comment

VMAXHumpday, 5/14/2014 – One CLI Command to Rule Them All

Posted on May 14, 2014 by sangeek

I wanted to type up a quick post today on my absolute favorite command in the CLI.  This is my ‘One CLI Command to Rule Them All’….or the ‘How much space should I tell my pointy haired manager this VMAX … Continue reading →

Posted in EMC, VMAX, VMAX Hump Day | 2 Comments

VMAXHumpday, 5/7/2014 – EMCWorld Special Edition – Storage Provisioning Future!

Posted on May 7, 2014 by sangeek

What would VMAXHumpday be during EMCworld without finding a really cool presentation and talking about it?  First of all, I am not at EMCWorld this year do to me slinging data around datacenters using the power of the force…wait, Open … Continue reading →

Posted in Conferences, EMC, varrow, VMAX, VMAX Hump Day | Leave a comment

VMAXhumpday, 4/30/2014 – Masking Views 101 pt2

Posted on April 30, 2014 by sangeek

Happy VMAXhumpday!  Hope everyone is just doing fine.  Is it almost May already?  I don’t know about you, but I’m ready for Summertime now!  Can’t wait to be out on the beach, sitting in the sand…dreaming about storage…..*record screech* Whaaat … Continue reading →

Posted in EMC, VMAX, VMAX Hump Day, vmware | Leave a comment

VMAXhumpday, 4/23/2014 – Masking Views 101 pt1

Posted on April 23, 2014 by sangeek

Happy VMAX Humpday! Today I will be covering something a little less technical but equally important and thrilling as my previous mini-series on Open Replicator.  I will talk about Masking views.  If you are experienced in VNX, just starting out … Continue reading →

Posted in EMC, VMAX, VMAX Hump Day | 1 Comment

VMAXhumpday, 4/16/2014 – Open Replicator pt. 2

Posted on April 16, 2014 by sangeek

Well, last week my Open Replicator post went over pretty good and I realized that I really needed to do another Open Replicator post…  This time it’s STONE COLD PULL Open replicator time.  Oh, and to throw something a little … Continue reading →

Posted in EMC, VMAX, VMAX Hump Day | 2 Comments